Home › Guides › Amateur satellites and the ISS
Amateur satellites and the ISS
A Technician license is enough to work amateur satellites and contact the International Space Station on VHF. Question group T8B covers how satellite contacts work, and a few rules questions cover who may use them.
Updated 2026-10-26
Who can use satellites
Any amateur with a Technician class or higher license may contact the ISS on VHF bands (T1B02). The control operator of a station working through a satellite can be any amateur allowed to transmit on the satellite's uplink frequency (T1E02). Under Part 97, a space station is an amateur station more than 50 km above the Earth's surface (T1A07).
Uplink, downlink and U/V mode
You transmit to the satellite on the uplink and listen on the downlink. A satellite in U/V mode has its uplink in the 70 centimeter band and its downlink in the 2 meter band (T8B08). Satellites carry several modes, so the pool answer for which mode they use is all of the choices (T8B04).
| Term | Meaning | Question |
|---|---|---|
| LEO | Low Earth Orbit, about 100 minutes per orbit | T8B10 |
| Doppler shift | Frequency change caused by the satellite moving relative to you | T8B07 |
| Spin fading | Signal fading from the satellite and its antennas rotating | T8B09 |
| Beacon | A transmission carrying the satellite's status information | T8B05 |
Use only the power you need
Too much effective radiated power on an uplink blocks other users (T8B02). On a linear transponder satellite, a good check is that your signal on the downlink is about as strong as the satellite's beacon (T8B12).
Tracking passes and reading telemetry
A LEO satellite is in view for only a few minutes at a time, so you need to know when it will pass. Satellite tracking programs take the Keplerian elements as input (T8B06) and show maps, pass times and Doppler-corrected frequencies (T8B03). Beacons usually send telemetry about the satellite's health and status (T8B01), and anyone may receive that telemetry (T8B11).
Before your first pass
Practice simplex and repeater contacts first, so you are comfortable with your radio and your call sign. See your first contact and repeater basics. For which bands you may use, see Technician frequencies.
- T8B01 What telemetry information is typically transmitted by satellite beacons?
Health and status of the satellite - T8B02 What is the impact of using excessive effective radiated power on a satellite uplink?
Blocking access by other users - T8B03 Which of the following are provided by satellite tracking programs?
All these choices are correct - T8B04 What mode of transmission is commonly used by amateur radio satellites?
All these choices are correct - T8B05 What is a satellite beacon?
A transmission from a satellite that contains status information - T8B06 Which of the following are inputs to a satellite tracking program?
The Keplerian elements - T8B07 What is Doppler shift in reference to satellite communications?
An observed change in signal frequency caused by relative motion between the satellite and Earth station - T8B08 What does it mean if a satellite is operating in U/V mode?
The satellite uplink is in the 70-centimeter band and the downlink is in the 2-meter band - T8B09 What causes spin fading of satellite signals?
Rotation of the satellite and its antennas - T8B10 What does the term LEO mean in reference to communication satellites?
Low Earth Orbit, which has a period of around 100 minutes - T8B11 Who is permitted to receive telemetry from an amateur radio satellite?
Anyone - T8B12 Which of the following is a way to determine whether your satellite uplink power into a linear transponder satellite is neither too low nor too high?
Your signal strength on the downlink should be about the same as the beacon
Questions people ask
Can a Technician talk to the International Space Station?
Yes. Any amateur with a Technician class or higher license may contact the ISS on VHF bands.
What is U/V mode on a satellite?
The uplink is in the 70 centimeter band and the downlink is in the 2 meter band.
How long is a low Earth orbit?
About 100 minutes per orbit.
Take a practice examPractice by topic
More guides
- Technician frequencies and privileges
- Technician vs General license
- How the Technician exam works
- Formulas for the Technician exam
- How to renew a ham radio license
- How to get a vanity call sign
- The phonetic alphabet for ham radio
- Repeater basics for new Technicians
- RF exposure safety, explained simply
- How to make your first contact
- Antenna basics for new hams
- How radio signals travel
- Electrical safety at your station
- Emergency communications for new hams
- Coax, connectors and SWR
- Digital modes and internet linking
- Technician study plan
- ARRL Field Day: a first-timer's guide
- Electronic components on the Technician exam
- Do you need Morse code for a ham license?
- What you can't transmit on ham radio
- Ham radio Q codes and what they mean
- Fixing radio interference (RFI)
- How to sign up for the real exam
- Your first radio
- Ham radio calculators