Ham Tech Prep

Home › Guides › Digital modes and internet linking

Digital modes and internet linking

Many new hams start with FM voice, but a Technician license also covers digital modes and internet-linked systems. Question groups T8D and T8C explain what each one is.

Updated 2026-10-27

Common digital modes

Digital modes send data or voice as digital signals. On the exam, the answer to which modes are digital is all of the choices (T8D01).

ModeWhat it isQuestion
FT8A digital mode that works with very weak signals (low signal-to-noise)T8D02
PSKPhase Shift KeyingT8D06
CWAnother name for Morse codeT8D09
PacketData packets that include a header, a checksum and automatic repeat requestT8D08
DMRTwo digital voice signals time-shared on one 12.5 kHz repeater channelT8D07
NTSCAnalog fast-scan color TV, not a digital modeT8D04

APRS

APRS can carry GPS position data, text messages and weather data (T8D03). A common use is real-time tactical messaging with a map that shows where each station is (T8D05).

WSJT-X and weak-signal work

The WSJT-X software suite, which includes FT8, supports moonbounce (Earth-Moon-Earth), meteor scatter and weak-signal propagation beacons (T8D10). With ARQ, the receiving station detects errors and asks for a retransmission (T8D11).

Internet linking: EchoLink, IRLP and gateways

VoIP means sending voice over the internet using digital techniques (T8C07). IRLP connects amateur systems such as repeaters over the internet (T8C08), and you reach an IRLP node over the air with DTMF tones (T8C06). EchoLink lets a station transmit through a repeater without a radio starting the transmission (T8C09), but you must register your call sign and show proof of license first (T8C10). A station that connects other amateur stations to the internet is a gateway (T8C11).

Mesh networks

An amateur radio mesh network is a data network built from commercial Wi-Fi equipment running modified firmware (T8D12). See Technician frequencies for the bands you may use, and repeater basics for how repeaters work.

  1. T8C01 Which of the following methods is used to locate sources of noise interference or jamming?
    Radio direction finding
  2. T8C02 Which of these items would be useful for a hidden transmitter hunt?
    A directional antenna
  3. T8C03 What operating activity involves contacting as many stations as possible during a specified period?
    Contesting
  4. T8C04 Which of the following is good practice when contacting another station in a contest?
    Sending only the minimum information needed for proper identification and the contest exchange
  5. T8C05 What is a grid locator?
    A letter-number designator assigned to a geographic location
  6. T8C06 How is over the air access to Internet Radio Linking Project (IRLP) nodes accomplished?
    By using Dual-Tone Multi-Frequency (DTMF) signals
  7. T8C07 What is Voice Over Internet Protocol (VoIP)?
    A method of delivering voice communications over the internet using digital techniques
  8. T8C08 What is the Internet Radio Linking Project (IRLP)?
    A technique to connect amateur radio systems, such as repeaters, via the internet
  9. T8C09 Which of the following protocols enables an amateur station to transmit through a repeater without using a radio to initiate the transmission?
    EchoLink
  10. T8C10 What is required before using the EchoLink system?
    Register your call sign and provide proof of license
  11. T8C11 What is an amateur radio station that connects other amateur stations to the internet?
    A gateway
  12. T8D01 Which of the following is a digital communications mode?
    All these choices are correct
  13. T8D02 What is FT8?
    A digital mode capable of low signal-to-noise operation
  14. T8D03 What kind of data can be transmitted by APRS?
    All these choices are correct
  15. T8D04 What is meant by the term "NTSC?"
    An analog fast-scan color TV signal
  16. T8D05 Which of the following is an application of APRS?
    Providing real-time tactical digital communications in conjunction with a map showing the locations of stations
  17. T8D06 What does the abbreviation "PSK" mean?
    Phase Shift Keying
  18. T8D07 Which of the following describes DMR?
    A technique for time-multiplexing two digital voice signals on a single 12.5 kHz repeater channel
  19. T8D08 Which of the following is included in packet radio transmissions?
    All these choices are correct
  20. T8D09 What is CW?
    Another name for a Morse code transmission
  21. T8D10 Which of the following operating activities is supported by digital mode software in the WSJT-X software suite?
    All these choices are correct
  22. T8D11 What is the role of ARQ in a transmission system?
    An error correction method in which the receiving station detects errors and sends a request for retransmission
  23. T8D12 Which of the following best describes an amateur radio mesh network?
    An amateur-radio data network using commercial Wi-Fi equipment with modified firmware

Questions people ask

What is FT8 in ham radio?

A digital mode that can work with very weak signals, at a low signal-to-noise ratio.

What do I need before using EchoLink?

You must register your call sign and provide proof of your license.

What does DMR do on a repeater?

It time-multiplexes two digital voice signals on a single 12.5 kHz repeater channel.

Take a practice examPractice by topic

More guides