Home › Guides
Ham radio license guides
Short answers to the questions people ask most about the amateur radio exams.
- Technician frequencies and privileges
Which bands a Technician license lets you use: all amateur bands above 50 MHz, plus CW on 80, 40 and 15 meters and CW, data and voice on part of 10 meters. Band chart and the related exam questions. - Technician vs General license
Compare the Technician and General ham radio licenses: the exams (35 questions, 26 to pass each), what General adds on HF, and when to upgrade. - How the Technician exam works
The Technician exam has 35 multiple-choice questions drawn from a public pool of 409, and you need 26 correct (74%). How questions are picked from each topic and how to use that to study. - Formulas for the Technician exam
The few formulas you need for the Technician exam: Ohm's law, power, wavelength from frequency, and unit prefixes, with worked examples and the official pool questions that use them. - How to renew a ham radio license
A US amateur license lasts 10 years. You can renew in the last 90 days, and an expired license can still be renewed for 2 years, but you may not transmit until it is. How to renew in ULS. - How to get a vanity call sign
Any licensed US amateur can request a vanity call sign. Which call sign groups Technician, General and Extra holders may pick, how the request works and what it costs. - The phonetic alphabet for ham radio
The NATO phonetic alphabet hams use to spell call signs on voice: the full Alpha to Zulu chart, how to say numbers, and what the FCC rules say about using it. - Repeater basics for new Technicians
How a ham repeater works: the 600 kHz and 5 MHz offsets, CTCSS tones, the reverse button, and why you can hear a repeater but not get in. Linked to the Technician questions. - RF exposure safety, explained simply
Plain-English RF safety for new hams: why radio waves are non-ionizing, why limits change with frequency, what duty cycle means, and who is responsible for compliance. - How to make your first contact
What to say for your first ham radio contact: calling on a repeater, calling CQ on simplex, answering a CQ, and identifying with your call sign. Based on the Technician pool. - Antenna basics for new hams
Antenna basics for the Technician exam and your first station: why a 2-meter whip is 19 inches, how a dipole radiates, what gain and polarization mean, and why the rubber duck is weak. - How radio signals travel
How radio signals travel: why VHF and UHF stop near the horizon, how the ionosphere carries HF around the world, and what sporadic E, tropospheric ducting and multipath mean. - Electrical safety at your station
Electrical safety for ham operators: correct fuse sizes, where lightning arresters go, bonding ground rods, battery and power-supply hazards, and safe meter use. Linked to Technician group T0A. - Emergency communications for new hams
How hams help in emergencies: what ARES and RACES are, how a net and net control work, what traffic and a radiogram preamble are, and when you may go outside your privileges. - Coax, connectors and SWR
Feed line basics for the Technician exam: why coax is 50 ohms, RG-58 vs RG-213, PL-259 vs Type N connectors, what SWR measures, and what an antenna tuner does. - Amateur satellites and the ISS
How ham radio satellite contacts work on a Technician license: U/V mode, Doppler shift, LEO passes, tracking programs, beacons and talking to the ISS, with the official exam questions. - Digital modes and internet linking
A plain-English guide to the digital modes on the Technician exam: FT8, PSK, packet, APRS, DMR, EchoLink, IRLP and mesh networks, each tied to its official pool question. - Technician study plan
A day-by-day way to study for the Technician exam with the public question pool: which topics first, how many practice exams to pass, and how to use flashcards for misses. - ARRL Field Day: a first-timer's guide
A first-timer's guide to ARRL Field Day (June 26-27, 2027): what happens, how the exchange works, what a Technician can operate, the GOTA station for new and unlicensed operators, and how to find a club near you. - Electronic components on the Technician exam
What each electronic component does, how to tell them apart, and the Technician exam questions on them (T6A and T6B): resistors, potentiometers, capacitors, inductors, switches, batteries, diodes, LEDs and transistors. - Do you need Morse code for a ham license?
Morse code is no longer required for any US amateur license. What Technicians can still do with CW, where CW-only segments are, and the Morse questions that appear on the exam. - What you can't transmit on ham radio
The FCC Part 97 rules on prohibited transmissions in plain English: music, encrypted messages, broadcasting, selling, pay, bad language and identification, with the Technician exam questions (T1D) that test them. - Ham radio Q codes and what they mean
The Q signals hams use most, what each one means, and the two Q-code questions on the Technician exam (QRM and QSY). - Fixing radio interference (RFI)
What to do when your ham signal shows up on a neighbor's TV or radio, or their devices interfere with you: the first checks, filters, ferrite chokes and the Technician exam questions on interference (T7B). - How to get your Technician license
- Your first ham radio
- Ham radio calculators