Ham Tech Prep

Home › Guides › Technician frequencies and privileges

Technician frequencies and privileges

A Technician license gives you every amateur band above 50 MHz, where most local repeater and handheld use happens, plus small slices of the HF bands for Morse code and, on 10 meters, voice.

Updated 2026-10-18 · Source: FCC Part 97.301 and 97.305 and the ARRL band chart

VHF and UHF: full privileges

Above 50 MHz a Technician has the same privileges as any other license class. These are the bands most new hams use with a handheld or car radio.

BandFrequenciesCommon use
6 meters50 to 54 MHzLong-distance openings in summer, FM and SSB
2 meters144 to 148 MHzLocal repeaters, FM simplex (146.52 MHz), satellites
1.25 meters222 to 225 MHzRepeaters, quieter than 2 m
70 centimeters420 to 450 MHzRepeaters, dual-band handhelds, satellites
33 centimeters902 to 928 MHzRepeaters and data
23 centimeters1240 to 1300 MHzRepeaters, amateur TV

HF: limited privileges

BandFrequenciesWhat you may send
80 meters3.525 to 3.600 MHzCW (Morse code) only
40 meters7.025 to 7.125 MHzCW only
15 meters21.025 to 21.200 MHzCW only
10 meters28.000 to 28.300 MHzCW, RTTY and data (such as FT8)
10 meters28.300 to 28.500 MHzCW and SSB voice

Want more of HF?

The General license opens most of the HF voice bands. It is another 35-question exam, usually taken after you have some time on the air.

Exam questions on this topic (T1B)

These are the official 2026-2030 Technician pool questions about frequencies and power. Tap one to practice it.

  1. T1B01 Which of the following frequency ranges are available for phone operation by Technician licensees?
    28.300 MHz to 28.500 MHz
  2. T1B02 Which of the following U.S. amateur radio operators are allowed to contact the International Space Station (ISS) on VHF bands?
    Any amateur with a Technician class or higher license
  3. T1B03 Which frequency is in the 6-meter amateur band?
    52.525 MHz
  4. T1B04 Which amateur band includes 146.52 MHz?
    2 meters
  5. T1B05 Which of the following bands include frequencies where Technicians are authorized to use digital modes such as FT8?
    All these choices are correct
  6. T1B06 On which HF bands does a Technician class operator have phone privileges?
    10-meter band only
  7. T1B07 Which of the following VHF/UHF band segments are limited to CW only?
    50.0 MHz to 50.1 MHz and 144.0 MHz to 144.1 MHz
  8. T1B08 How are US amateurs restricted in segments of bands where the Amateur Radio Service is secondary?
    U.S. amateurs may find non-amateur stations in those segments, and must avoid interfering with them
  9. T1B09 Why should you not set your transmit frequency to be exactly at the edge of an amateur band or sub-band?
    All these choices are correct
  10. T1B10 Where may SSB phone be used in amateur bands above 50 MHz?
    In at least some segment of all these bands
  11. T1B11 What is the maximum peak envelope power output for Technician class operators in their HF band segments?
    200 watts
  12. T1B12 Except for some specific restrictions, what is the maximum peak envelope power output for Technician class operators using frequencies above 30 MHz?
    1500 watts

Questions people ask

Can a Technician talk on HF?

Yes, by voice only on 10 meters (28.300 to 28.500 MHz). On parts of 80, 40, 15 and 10 meters a Technician may use Morse code, and on part of 10 meters digital modes like FT8.

What is the maximum power for a Technician?

200 watts PEP on the HF segments, and generally up to 1,500 watts PEP above 30 MHz.

What frequency is the 2-meter national simplex calling frequency?

146.52 MHz, in the 2-meter band.

Take a practice examPractice by topic

More guides