Home › Guides › Do you need Morse code for a ham license?
Do you need Morse code for a ham license?
No. The FCC dropped the Morse code test for every US amateur license in 2007. You can earn Technician, General and Extra with written exams only. Morse code (called CW) is still a popular, optional way to operate.
Updated 2026-11-19
What changed
For decades, US hams had to pass a Morse code receiving test. The FCC removed that requirement for all license classes in February 2007. Today the only exams are the multiple-choice written elements: Element 2 for Technician, Element 3 for General and Element 4 for Extra.
What a Technician can do with CW
Even without a code test, a Technician may send CW on parts of four HF bands: 80, 40, 15 and 10 meters. On 80, 40 and 15 meters those segments are CW only. Our Technician frequency chart lists the exact ranges.
- On VHF and UHF, Technicians have full privileges, and CW is allowed everywhere voice is.
- Two VHF segments are reserved for CW only: 50.0 to 50.1 MHz and 144.0 to 144.1 MHz (exam question T1B07).
Morse code questions on the Technician exam
- T8D09: CW is another name for a Morse code transmission.
- T8A11: a CW signal needs about 150 Hz of bandwidth, far less than voice. That is why weak CW signals get through when voice does not.
- T4A12: an electronic keyer helps you send Morse code by hand.
- T1D02: one-way transmissions for Morse code practice are allowed; broadcasting is not.
- T8A01 Which of the following is a form of amplitude modulation?
Single sideband - T8A02 What type of modulation is commonly used for VHF packet radio transmissions?
FM or PM - T8A03 Which type of voice mode is often used for long-distance (weak signal) contacts on the VHF and UHF bands?
SSB - T8A04 Which type of modulation is commonly used for VHF and UHF voice repeaters?
FM or PM - T8A05 Which of the following signal types has the narrowest bandwidth?
CW - T8A06 Which sideband is normally used for 10-meter HF, VHF, and UHF single-sideband communications?
Upper sideband - T8A07 What is one characteristic of single sideband (SSB) compared to FM?
SSB signals have narrower bandwidth - T8A08 What is the approximate bandwidth of a typical single sideband (SSB) voice signal?
3 kHz - T8A09 What is the approximate bandwidth of an FM voice signal on VHF repeaters?
Between 10 and 15 kHz - T8A10 What is the approximate bandwidth of AM fast-scan TV transmissions?
About 6 MHz - T8A11 What is the approximate bandwidth required to transmit a CW signal?
150 Hz - T8A12 Which of the following is a disadvantage of FM compared with single sideband?
Only one signal can be received at a time - T8D01 Which of the following is a digital communications mode?
All these choices are correct - T8D02 What is FT8?
A digital mode capable of low signal-to-noise operation - T8D03 What kind of data can be transmitted by APRS?
All these choices are correct - T8D04 What is meant by the term "NTSC?"
An analog fast-scan color TV signal - T8D05 Which of the following is an application of APRS?
Providing real-time tactical digital communications in conjunction with a map showing the locations of stations - T8D06 What does the abbreviation "PSK" mean?
Phase Shift Keying - T8D07 Which of the following describes DMR?
A technique for time-multiplexing two digital voice signals on a single 12.5 kHz repeater channel - T8D08 Which of the following is included in packet radio transmissions?
All these choices are correct - T8D09 What is CW?
Another name for a Morse code transmission - T8D10 Which of the following operating activities is supported by digital mode software in the WSJT-X software suite?
All these choices are correct - T8D11 What is the role of ARQ in a transmission system?
An error correction method in which the receiving station detects errors and sends a request for retransmission - T8D12 Which of the following best describes an amateur radio mesh network?
An amateur-radio data network using commercial Wi-Fi equipment with modified firmware
Why some hams still learn it
- CW gets through with low power and simple gear because the signal is so narrow.
- The 80, 40 and 15 meter Technician privileges are CW only, so code opens up long-distance HF contacts before you upgrade to General.
- Many operators simply enjoy it. You can learn at your own pace; there is no test to pass.
Questions people ask
Is there a Morse code test for General or Extra?
No. Since 2007 all three license classes need only written exams.
Can I use Morse code with a Technician license?
Yes. Technicians may use CW on all their VHF/UHF frequencies and on parts of the 80, 40, 15 and 10 meter HF bands.
Do I have to know Morse code to identify my station?
No. On voice you identify by saying your call sign. Identifying in CW is allowed but not required (T1F05).
Take a practice examPractice by topic
More guides
- Technician frequencies and privileges
- Technician vs General license
- How the Technician exam works
- Formulas for the Technician exam
- How to renew a ham radio license
- How to get a vanity call sign
- The phonetic alphabet for ham radio
- Repeater basics for new Technicians
- RF exposure safety, explained simply
- How to make your first contact
- Antenna basics for new hams
- How radio signals travel
- Electrical safety at your station
- Emergency communications for new hams
- Coax, connectors and SWR
- Amateur satellites and the ISS
- Digital modes and internet linking
- Technician study plan
- ARRL Field Day: a first-timer's guide
- Electronic components on the Technician exam
- What you can't transmit on ham radio
- Ham radio Q codes and what they mean
- Fixing radio interference (RFI)
- How to sign up for the real exam
- Your first radio
- Ham radio calculators