Ham Tech Prep

Home › Guides › How to make your first contact

How to make your first contact

Your call sign appears in the FCC database, you have a radio, and now you have to say something. Here is what experienced operators expect to hear, taken from the same rules the Technician exam tests.

Updated 2026-10-23

Listen first

Spend a few minutes listening before you transmit. You will hear how locals call each other and whether the frequency is busy. On FM, the 2-meter national simplex calling frequency is 146.520 MHz (T2A02).

On a repeater

To let people know you are around, say your call sign followed by "listening", for example "KF1XYZ listening" (T2A09). To reach someone you know, say their call sign, then yours: "W1ABC, this is KF1XYZ" (T2A04). If the repeater does not respond, see the repeater basics guide.

Calling CQ on simplex or HF

CQ means calling any station (T2A08). Say "CQ" a few times, then "this is" and your call sign, then pause and listen. Repeat as needed (T2A06).

Answering someone else's CQ

Give the other station's call sign, then yours (T2A05): "W1ABC, this is KF1XYZ." Then exchange names, locations and signal reports.

Identifying

You must give your call sign at least every 10 minutes during a contact and at the end of it (T1F03). On voice, the phonetic alphabet makes it easier to understand.

  1. T1F01 When must the station licensee make the station and the station records available for inspection?
    At any time upon request by an FCC representative
  2. T1F02 How often must you identify with your FCC-assigned call sign when using tactical call signs such as “Race Headquarters”?
    At least every 10 minutes during and at the end of a communication
  3. T1F03 When are you required to transmit your assigned call sign?
    At least every 10 minutes during and at the end of a communication
  4. T1F04 What language must you use for identification when using a phone emission?
    English
  5. T1F05 What method of call sign identification is required for a station transmitting phone signals?
    Send the call sign using a CW or phone emission
  6. T1F06 Which of the following self-assigned indicators are acceptable when using a phone transmission?
    All these choices are correct
  7. T1F07 Which of the following restrictions apply when a non-licensed person speaks to a foreign amateur radio station via a station under the control of an FCC-licensed amateur radio operator?
    The foreign station must be in a country with which the U.S. has a third-party agreement
  8. T1F08 What is the definition of third-party communications?
    A message from a control operator to another amateur station control operator on behalf of another person
  9. T1F09 What type of amateur station simultaneously retransmits the signal of another amateur station on a different channel or channels?
    Repeater station
  10. T1F10 Who is accountable if a repeater inadvertently retransmits communications that violate the FCC rules?
    The control operator of the originating station
  11. T1F11 Which of the following is a requirement for the issuance of a club station license grant?
    The club must have at least four members
  12. T2A01 What is a common repeater frequency offset in the 2-meter band?
    Plus or minus 600 kHz
  13. T2A02 What is the national calling frequency for FM simplex operations in the 2-meter band?
    146.520 MHz
  14. T2A03 What is a common repeater frequency offset in the 70-centimeter band?
    Plus or minus 5 MHz
  15. T2A04 What is an appropriate way to call another station on a repeater if you know the other station's call sign?
    Say the station's call sign, then identify with your call sign
  16. T2A05 How should you respond to a station calling CQ?
    Transmit the other station's call sign followed by your call sign
  17. T2A06 What is an effective way to seek a call from any phone station when not using a repeater?
    Repeat “CQ” a few times, followed by “this is,” and your call sign, then pause to listen; repeat as necessary
  18. T2A07 What does the term "repeater offset" mean?
    The difference between a repeater's transmit and receive frequencies
  19. T2A08 What is the meaning of the procedural signal “CQ”?
    Calling any station
  20. T2A09 Which of the following is a customary way to indicate a station is listening on a repeater and looking for a contact?
    The station's call sign followed by the word “listening”
  21. T2A10 What is a band plan, beyond the privileges established by the FCC?
    A voluntary guideline for using different modes or activities within an amateur band
  22. T2A11 What term describes an amateur station that is transmitting and receiving on the same frequency?
    Simplex

Questions people ask

What do I say for my first contact on a repeater?

Your call sign followed by "listening", or the other station's call sign then yours.

What is the 2-meter simplex calling frequency?

146.520 MHz FM.

How do I answer a CQ?

Say the other station's call sign, then your own.

Take a practice examPractice by topic

More guides