Ham Tech Prep

Home › Guides › How radio signals travel

How radio signals travel

Why can you talk across an ocean on 10 meters but barely across town on 70 centimeters? The answer is propagation. Question groups T3A and T3C cover it on the Technician exam.

Updated 2026-10-24

VHF and UHF: mostly line of sight

Simplex UHF signals are rarely heard beyond the radio horizon because the ionosphere usually does not carry them (T3C01). The radio horizon is a little farther than the visual one, because the atmosphere bends radio waves slightly (T3C11).

HF: bouncing off the ionosphere

The ionosphere is the region of the atmosphere that can reflect HF radio waves (T3A11). That makes long-distance contacts far more common on HF than on VHF and up (T3C02). The 10-meter band is usually best for long distance via the F region from dawn to shortly after sunset when sunspot activity is high (T3C09), and 6 and 10 meters can both open via the F region at the peak of the sunspot cycle (T3C10).

Surprise openings on VHF

NameWhat happensQuestion
Sporadic EOccasional strong signals on 10, 6 and 2 meters from beyond the horizonT3C04
Tropospheric ductingVHF and UHF regularly reach about 300 miles, caused by temperature inversionsT3C06, T3C08
Meteor scatterBrief contacts off meteor trails, best on 6 metersT3C07
Knife-edge diffractionSignals bend over a sharp obstruction such as a ridgeT3C05
Auroral backscatterSignals sound distorted and raspyT3C03

Multipath and fading

When a signal reaches you by several paths, they add or cancel. That is why VHF signal strength can change a lot when you move the antenna a few feet (T3A01), and why mobile signals flutter, called picket fencing (T3A06). Multipath also raises error rates for data (T3A10).

Weather and trees

Rain and other precipitation can shorten range at microwave frequencies (T3A07), but fog or rain has little effect on 10 and 6 meters (T3A12). Trees and other vegetation absorb UHF and microwave signals (T3A02).

  1. T3A01 Why do VHF signal strengths sometimes vary greatly when the antenna is moved only a few feet?
    Multipath propagation cancels or reinforces signals
  2. T3A02 How does vegetation affect UHF and microwave signals?
    Absorbs signals, leading to poor reception of weak signals
  3. T3A03 What antenna polarization is normally used for long-distance CW and SSB contacts on the VHF and UHF bands?
    Horizontal
  4. T3A04 What is the effect of antenna cross-polarization over a line-of-sight VHF or UHF path?
    Received signal strength is reduced
  5. T3A05 When using a directional antenna, how might your station be able to communicate with a distant repeater if buildings or obstructions are blocking the direct line of sight path?
    Try to find a path that reflects signals to the repeater
  6. T3A06 What is the meaning of the term “picket fencing”?
    Rapid flutter on mobile signals due to multipath propagation
  7. T3A07 What weather condition might decrease range at microwave frequencies?
    Precipitation
  8. T3A08 What is a likely cause of irregular fading of signals propagated by the ionosphere?
    Random combining of signals arriving via different paths
  9. T3A09 Which of the following results from the fact that signals propagated by the ionosphere are elliptically polarized?
    Either vertically or horizontally polarized antennas may be used for transmission or reception
  10. T3A10 What effect does multi-path propagation have on data transmissions?
    Error rates are likely to increase
  11. T3A11 Which region of the atmosphere can reflect HF radio waves?
    The ionosphere
  12. T3A12 What effect does fog or rain have on 10-meter and 6-meter band signals?
    Little effect
  13. T3C01 Why are simplex UHF signals rarely heard beyond their radio horizon?
    UHF signals are usually not propagated by the ionosphere
  14. T3C02 What is a characteristic of HF communication compared with communications on VHF and higher frequencies?
    Long-distance ionospheric propagation is far more common on HF
  15. T3C03 What is one characteristic of VHF signals received via auroral backscatter?
    They are distorted, with a characteristic raspy sound
  16. T3C04 Which of the following types of propagation is most commonly associated with occasional strong signals on the 10-, 6-, and 2-meter bands from beyond the radio horizon?
    Sporadic E
  17. T3C05 Which of the following effects may allow radio signals to travel beyond obstructions between the transmitting and receiving stations?
    Knife-edge diffraction
  18. T3C06 What type of propagation is responsible for allowing over-the-horizon VHF and UHF communications to ranges of approximately 300 miles on a regular basis?
    Tropospheric ducting
  19. T3C07 What band is best suited for communicating via meteor scatter?
    6 meters
  20. T3C08 What causes tropospheric ducting?
    Temperature inversions in the atmosphere
  21. T3C09 What is generally the best time for long-distance 10-meter band propagation via the F region?
    From dawn to shortly after sunset during periods of high sunspot activity
  22. T3C10 Which of the following bands may provide long-distance communications via the ionosphere's F region during the peak of the sunspot cycle?
    6 and 10 meters
  23. T3C11 Why is the radio horizon for VHF and UHF signals more distant than the visual horizon?
    The atmosphere refracts radio waves slightly

Questions people ask

Why can't I reach far on UHF?

UHF signals are usually not carried by the ionosphere, so they stop near the radio horizon.

What causes tropospheric ducting?

Temperature inversions in the atmosphere.

What is sporadic E?

A type of propagation that brings occasional strong signals on 10, 6 and 2 meters from beyond the horizon.

Take a practice examPractice by topic

More guides