Ham Tech Prep

Technician › T8

T8 Signals and Emissions

47 questions in the pool. Your exam will include 4, one from each group below.

Practice T8 now

T8A

Basic characteristics of FM and SSB; Bandwidth of various modulation modes: CW, SSB, FM, fast-scan TV; Choice of emission type: selection of USB vs LSB, use of SSB for weak signal work, use of FM for VHF packet and repeaters

T8A01

Which of the following is a form of amplitude modulation?

  1. A. Spread spectrum
  2. B. Packet radio
  3. C. Single sideband
  4. D. Phase shift keying (PSK)
Show the answer and explanation

Answer: C. Single sideband

Single sideband is a form of amplitude modulation. It starts as an AM signal, then the carrier and one sideband are removed so only one sideband is sent. Spread spectrum, packet radio, and PSK are not AM methods.

Tip: SSB = AM with the extra parts trimmed off.

T8A02

What type of modulation is commonly used for VHF packet radio transmissions?

  1. A. FM or PM
  2. B. SSB
  3. C. AM
  4. D. PSK
Show the answer and explanation

Answer: A. FM or PM

VHF packet radio usually runs through ordinary FM radios, so it uses FM or PM. The data tones are fed into the radio's microphone input and sent like voice. SSB, AM, and PSK are not the usual choice for VHF packet.

Tip: VHF packet rides on your FM rig.

T8A03

Which type of voice mode is often used for long-distance (weak signal) contacts on the VHF and UHF bands?

  1. A. FM
  2. B. DRM
  3. C. SSB
  4. D. PM
Show the answer and explanation

Answer: C. SSB

SSB is the voice mode used for long-distance, weak-signal work on VHF and UHF. Its narrow bandwidth puts all the power into a small slice of spectrum, so weak signals are easier to hear. FM is popular locally but needs a stronger signal to sound clear.

Tip: Weak and far? Use SSB.

T8A04

Which type of modulation is commonly used for VHF and UHF voice repeaters?

  1. A. AM
  2. B. SSB
  3. C. PSK
  4. D. FM or PM
Show the answer and explanation

Answer: D. FM or PM

VHF and UHF voice repeaters normally use FM or PM. FM gives clear, noise-free audio for local contacts and works well with handheld and mobile radios. SSB and AM are rarely used on repeaters.

Tip: Repeaters speak FM.

T8A05

Which of the following signal types has the narrowest bandwidth?

  1. A. FM voice
  2. B. SSB voice
  3. C. CW
  4. D. Slow-scan TV
Show the answer and explanation

Answer: C. CW

CW has the narrowest bandwidth of these choices, about 150 Hz. It is just a carrier turned on and off. SSB voice needs about 3 kHz, FM voice about 10-15 kHz, and slow-scan TV is wider than CW too.

Tip: Morse code is the skinniest signal.

T8A06

Which sideband is normally used for 10-meter HF, VHF, and UHF single-sideband communications?

  1. A. Upper sideband
  2. B. Lower sideband
  3. C. Suppressed sideband
  4. D. Inverted sideband
Show the answer and explanation

Answer: A. Upper sideband

Upper sideband is the standard for SSB on 10 meters, VHF, and UHF. Lower sideband is mostly used on the lower HF bands like 160, 80, and 40 meters. Suppressed and inverted sideband are not normal operating choices.

Tip: 10 meters and up: upper sideband.

T8A07

What is one characteristic of single sideband (SSB) compared to FM?

  1. A. SSB signals are easier to tune in correctly
  2. B. SSB signals are less susceptible to interference
  3. C. SSB signals have narrower bandwidth
  4. D. SSB signals are less susceptible to high SWR
Show the answer and explanation

Answer: C. SSB signals have narrower bandwidth

SSB signals have narrower bandwidth than FM. An SSB voice signal is about 3 kHz wide, while FM voice is about 10-15 kHz. SSB is actually harder to tune in correctly than FM, so that choice is wrong.

Tip: SSB is skinny; FM is wide.

T8A08

What is the approximate bandwidth of a typical single sideband (SSB) voice signal?

  1. A. 1 kHz
  2. B. 3 kHz
  3. C. 6 kHz
  4. D. 15 kHz
Show the answer and explanation

Answer: B. 3 kHz

A typical SSB voice signal is about 3 kHz wide. That is just enough room for the speech sounds needed to understand a voice. 1 kHz is too narrow for voice, and 6 kHz is closer to an AM signal.

Tip: SSB voice: 3 kHz.

T8A09

What is the approximate bandwidth of an FM voice signal on VHF repeaters?

  1. A. Less than 500 Hz
  2. B. About 150 kHz
  3. C. Between 10 and 15 kHz
  4. D. Between 50 and 125 kHz
Show the answer and explanation

Answer: C. Between 10 and 15 kHz

FM voice on VHF repeaters takes about 10 to 15 kHz. That is several times wider than SSB voice. 150 kHz is closer to a broadcast FM station, not a ham repeater.

Tip: FM repeater voice: 10-15 kHz.

T8A10

What is the approximate bandwidth of AM fast-scan TV transmissions?

  1. A. More than 10 MHz
  2. B. About 6 MHz
  3. C. About 3 MHz
  4. D. About 1 MHz
Show the answer and explanation

Answer: B. About 6 MHz

AM fast-scan TV needs about 6 MHz of bandwidth, the same as an analog broadcast TV channel. Sending full-motion pictures takes far more room than voice. That is why it is only used on UHF and higher bands.

Tip: Fast-scan TV fills a 6 MHz TV channel.

T8A11

What is the approximate bandwidth required to transmit a CW signal?

  1. A. 2.4 kHz
  2. B. 150 Hz
  3. C. 1000 Hz
  4. D. 15 kHz
Show the answer and explanation

Answer: B. 150 Hz

A CW signal needs only about 150 Hz. Sending Morse code is just switching a carrier on and off, which takes very little spectrum. 2.4 kHz is about what SSB voice uses.

Tip: CW: 150 Hz, the narrowest mode.

T8A12

Which of the following is a disadvantage of FM compared with single sideband?

  1. A. Voice quality is poorer
  2. B. Only one signal can be received at a time
  3. C. FM signals are harder to tune
  4. D. FM signals are more susceptible to high SWR
Show the answer and explanation

Answer: B. Only one signal can be received at a time

With FM, only one signal can be received at a time. When two FM signals are on the same frequency, the stronger one usually takes over and the weaker one disappears (the capture effect). With SSB you can often hear both at once.

Tip: FM capture: the strongest signal wins.

T8B

Amateur satellite operation: Doppler shift, basic orbits, operating protocols, modulation mode selection, transmitter power considerations, telemetry, satellite tracking programs, beacons, uplink and downlink mode definitions, spin fading, definition of “LEO”, setting uplink power

T8B01

What telemetry information is typically transmitted by satellite beacons?

  1. A. The signal strength of received signals
  2. B. Time of day accurate to plus or minus 1/10 second
  3. C. Health and status of the satellite
  4. D. All these choices are correct
Show the answer and explanation

Answer: C. Health and status of the satellite

Satellite beacons typically send the health and status of the satellite. This telemetry can include things like battery voltage, temperatures, and solar panel current. It helps controllers and users know how the satellite is doing.

Tip: Beacon = satellite's health report.

T8B02

What is the impact of using excessive effective radiated power on a satellite uplink?

  1. A. Possibility of commanding the satellite to an improper mode
  2. B. Blocking access by other users
  3. C. Overloading the satellite batteries
  4. D. Possibility of rebooting the satellite control computer
Show the answer and explanation

Answer: B. Blocking access by other users

Using too much power on a satellite uplink blocks access by other users. A linear transponder shares its limited power among all the signals it relays, so one loud signal takes more than its fair share. Use only the power you need.

Tip: Too loud on the uplink hogs the satellite.

T8B03

Which of the following are provided by satellite tracking programs?

  1. A. Maps showing the real-time position of the satellite track over Earth
  2. B. The time, azimuth, and elevation of the start, maximum altitude, and end of a pass
  3. C. The apparent frequency of the satellite transmission, including effects of Doppler shift
  4. D. All these choices are correct
Show the answer and explanation

Answer: D. All these choices are correct

All these choices are correct. Tracking programs show real-time maps of the satellite's path, the times and pointing angles (azimuth and elevation) for each pass, and the expected frequency shift caused by Doppler.

Tip: Tracking software tells where, when, and what frequency.

T8B04

What mode of transmission is commonly used by amateur radio satellites?

  1. A. SSB
  2. B. FM
  3. C. CW/data
  4. D. All these choices are correct
Show the answer and explanation

Answer: D. All these choices are correct

All these choices are correct. Amateur satellites use SSB, FM, and CW/data, depending on the satellite. Some carry FM voice repeaters, while others have linear transponders for SSB and CW.

Tip: Satellites use many modes: all of them.

T8B05

What is a satellite beacon?

  1. A. The primary transmit antenna on the satellite
  2. B. An indicator light that shows where to point your antenna
  3. C. A reflective surface on the satellite
  4. D. A transmission from a satellite that contains status information
Show the answer and explanation

Answer: D. A transmission from a satellite that contains status information

A satellite beacon is a transmission from a satellite that contains status information. It is a signal, not a light, antenna, or reflector. Listening to it also helps you find and track the satellite.

Tip: Beacon = status broadcast from space.

T8B06

Which of the following are inputs to a satellite tracking program?

  1. A. The satellite transmitted power
  2. B. The Keplerian elements
  3. C. The last observed time of zero Doppler shift
  4. D. All these choices are correct
Show the answer and explanation

Answer: B. The Keplerian elements

The Keplerian elements are the input to a satellite tracking program. These numbers describe the satellite's orbit, so the program can predict where it will be. The program calculates Doppler itself; you don't enter it.

Tip: Kepler's numbers in, satellite passes out.

T8B07

What is Doppler shift in reference to satellite communications?

  1. A. A change in the satellite orbit
  2. B. A mode where the satellite receives signals on one band and transmits on another
  3. C. An observed change in signal frequency caused by relative motion between the satellite and Earth station
  4. D. A special digital communications mode for some satellites
Show the answer and explanation

Answer: C. An observed change in signal frequency caused by relative motion between the satellite and Earth station

Doppler shift is an observed change in signal frequency caused by relative motion between the satellite and Earth station. As the satellite comes toward you, its frequency appears higher; as it moves away, lower. It is like a passing car's siren changing pitch.

Tip: Approaching = higher, leaving = lower.

T8B08

What does it mean if a satellite is operating in U/V mode?

  1. A. The satellite uplink is in the 15-meter band and the downlink is in the 10-meter band
  2. B. The satellite uplink is in the 70-centimeter band and the downlink is in the 2-meter band
  3. C. The satellite operates using ultraviolet frequencies
  4. D. The satellite frequencies are usually variable
Show the answer and explanation

Answer: B. The satellite uplink is in the 70-centimeter band and the downlink is in the 2-meter band

U/V mode means the uplink is in the 70-centimeter band (UHF) and the downlink is in the 2-meter band (VHF). The first letter is the uplink and the second letter is the downlink. It has nothing to do with ultraviolet light.

Tip: First letter up, second letter down.

T8B09

What causes spin fading of satellite signals?

  1. A. Circular polarized noise interference radiated from the sun
  2. B. Rotation of the satellite and its antennas
  3. C. Doppler shift of the received signal
  4. D. Interfering signals within the satellite uplink band
Show the answer and explanation

Answer: B. Rotation of the satellite and its antennas

Spin fading is caused by rotation of the satellite and its antennas. As the satellite turns, its antennas point toward and away from you, so the signal rises and falls in a regular pattern. Doppler changes frequency, not strength.

Tip: Spinning satellite, fading signal.

T8B10

What does the term LEO mean in reference to communication satellites?

  1. A. Low Energy Orbit, which conserves battery power
  2. B. Low Elevation Orbit, which appears close to the horizon from the earth station
  3. C. Low Equilibrium Orbit, which has a slightly unstable period
  4. D. Low Earth Orbit, which has a period of around 100 minutes
Show the answer and explanation

Answer: D. Low Earth Orbit, which has a period of around 100 minutes

LEO means Low Earth Orbit, which has a period of around 100 minutes. These satellites are close to Earth, so they circle quickly and each pass over you lasts only several minutes. The other expansions are made up.

Tip: LEO: low and fast, about 100 minutes a lap.

T8B11

Who is permitted to receive telemetry from an amateur radio satellite?

  1. A. Anyone
  2. B. Only the satellite control operator
  3. C. Only the control operator or a licensed radio amateur who has received the encryption key from the control operator
  4. D. Only a licensed radio amateur who has received the encryption key from AMSAT
Show the answer and explanation

Answer: A. Anyone

Anyone is permitted to receive telemetry from an amateur radio satellite. Amateur telemetry is not secret, and anyone can listen to it. Encryption keys are not needed to receive it.

Tip: Ham satellite telemetry is open to everyone.

T8B12

Which of the following is a way to determine whether your satellite uplink power into a linear transponder satellite is neither too low nor too high?

  1. A. Check your signal strength report in the telemetry data
  2. B. Listen for distortion on your downlink signal
  3. C. Your signal strength on the downlink should be about the same as the beacon
  4. D. Compare your signal to others on the downlink using an internet SDR receiver
Show the answer and explanation

Answer: C. Your signal strength on the downlink should be about the same as the beacon

Your signal strength on the downlink should be about the same as the beacon. That shows you are using enough power to be heard but not so much that you take over the transponder. Matching the beacon is a simple, built-in reference.

Tip: Match the beacon, not more.

T8C

Operating activities: radio direction finding, contests, linking over the internet, exchanging grid locators

T8C01

Which of the following methods is used to locate sources of noise interference or jamming?

  1. A. Echolocation
  2. B. Doppler radar
  3. C. Radio direction finding
  4. D. Phase locking
Show the answer and explanation

Answer: C. Radio direction finding

Radio direction finding is used to locate sources of noise interference or jamming. It uses directional antennas and receivers to find which way a signal is coming from. Echolocation and Doppler radar are not ham tools for this.

Tip: To find a signal, use direction finding.

T8C02

Which of these items would be useful for a hidden transmitter hunt?

  1. A. Calibrated SWR meter
  2. B. A directional antenna
  3. C. A directional wattmeter
  4. D. All these choices are correct
Show the answer and explanation

Answer: B. A directional antenna

A directional antenna is useful for a hidden transmitter hunt. By turning it and noting where the signal is strongest, you can tell which way to go. SWR meters and wattmeters measure your own transmitter, not where a signal comes from.

Tip: Fox hunt: bring a beam.

T8C03

What operating activity involves contacting as many stations as possible during a specified period?

  1. A. Simulated emergency exercises
  2. B. Net operations
  3. C. Hidden transmitter hunts
  4. D. Contesting
Show the answer and explanation

Answer: D. Contesting

Contesting is the activity of contacting as many stations as possible during a set time. Contest operators try to rack up contacts and points. Nets and emergency drills have other goals.

Tip: Contest = most contacts in the time limit.

T8C04

Which of the following is good practice when contacting another station in a contest?

  1. A. Signing only the last two letters of your call if there are many other stations calling
  2. B. Contacting the station twice to be sure that you are in his log
  3. C. Sending only the minimum information needed for proper identification and the contest exchange
  4. D. Adding “Please copy” before your exchange
Show the answer and explanation

Answer: C. Sending only the minimum information needed for proper identification and the contest exchange

Good contest practice is sending only the minimum information needed for proper identification and the contest exchange. Keeping it short lets everyone make more contacts. You must still give your full call sign, never just part of it.

Tip: Contest contacts: short, complete, done.

T8C05

What is a grid locator?

  1. A. A letter-number designator assigned to a geographic location
  2. B. A letter-number designator assigned to an azimuth and elevation
  3. C. An instrument for locating faults in power amplifiers
  4. D. An instrument for radio direction finding
Show the answer and explanation

Answer: A. A letter-number designator assigned to a geographic location

A grid locator is a letter-number designator assigned to a geographic location. For example, a grid like FN31 names an area on a map. Hams use grids to share their location, especially on VHF/UHF and in contests.

Tip: Grid square = map location code.

T8C06

How is over the air access to Internet Radio Linking Project (IRLP) nodes accomplished?

  1. A. By obtaining a password that is sent via voice to the node
  2. B. By using Dual-Tone Multi-Frequency (DTMF) signals
  3. C. By entering the proper internet password
  4. D. By using Continuous Tone-Coded Squelch System (CTCSS) tone codes
Show the answer and explanation

Answer: B. By using Dual-Tone Multi-Frequency (DTMF) signals

Over-the-air access to IRLP nodes uses DTMF (Dual-Tone Multi-Frequency) signals. These are the touch-tone sounds your radio's keypad sends. CTCSS tones only open a repeater's squelch; they don't select a node.

Tip: Touch-tone keypad dials IRLP.

T8C07

What is Voice Over Internet Protocol (VoIP)?

  1. A. A set of rules specifying how to identify your station when linked over the internet to another station
  2. B. A technique employed to “spot” DX stations via the internet
  3. C. A technique for measuring the modulation quality of a transmitter using remote sites monitored via the internet
  4. D. A method of delivering voice communications over the internet using digital techniques
Show the answer and explanation

Answer: D. A method of delivering voice communications over the internet using digital techniques

VoIP (Voice Over Internet Protocol) is a method of delivering voice communications over the internet using digital techniques. Your voice is turned into digital data, sent over the internet, and turned back into sound. Systems like EchoLink and IRLP use it.

Tip: VoIP = voice carried as internet data.

T8C08

What is the Internet Radio Linking Project (IRLP)?

  1. A. A technique to connect amateur radio systems, such as repeaters, via the internet
  2. B. A system for providing access to websites via amateur radio
  3. C. A system for informing amateurs in real time of the frequency of active DX stations
  4. D. A technique for measuring signal strength of an amateur transmitter via the internet
Show the answer and explanation

Answer: A. A technique to connect amateur radio systems, such as repeaters, via the internet

IRLP is a technique to connect amateur radio systems, such as repeaters, via the internet. A radio user can talk through a local node and be heard on a linked node far away. It is not for browsing websites or spotting DX.

Tip: IRLP links repeaters over the internet.

T8C09

Which of the following protocols enables an amateur station to transmit through a repeater without using a radio to initiate the transmission?

  1. A. IRLP
  2. B. D-STAR
  3. C. DMR
  4. D. EchoLink
Show the answer and explanation

Answer: D. EchoLink

EchoLink lets you transmit through a linked repeater without using a radio, because you can connect from a computer or smartphone app. IRLP access is by radio. D-STAR and DMR are digital radio modes.

Tip: EchoLink works from your computer or phone.

T8C10

What is required before using the EchoLink system?

  1. A. Complete the required EchoLink training
  2. B. Purchase a license to use the EchoLink software
  3. C. Register your call sign and provide proof of license
  4. D. At least a General Class license
Show the answer and explanation

Answer: C. Register your call sign and provide proof of license

Before using EchoLink, you must register your call sign and provide proof of license. This keeps the system limited to licensed amateurs. The software is free, and a Technician license is enough.

Tip: EchoLink: prove you're licensed first.

T8C11

What is an amateur radio station that connects other amateur stations to the internet?

  1. A. A gateway
  2. B. A repeater
  3. C. A digipeater
  4. D. A beacon
Show the answer and explanation

Answer: A. A gateway

A gateway is an amateur station that connects other amateur stations to the internet. A repeater retransmits signals on the air, a digipeater relays digital packets, and a beacon just transmits for observation.

Tip: Gateway = gate between radio and internet.

T8D

Non-voice and digital communications: image signals and definition of NTSC, CW, packet radio, PSK, APRS, error detection and correction, amateur radio networking, DMR, WSJT modes, Broadband-Hamnet

T8D01

Which of the following is a digital communications mode?

  1. A. Packet radio
  2. B. IEEE 802.11
  3. C. FT8
  4. D. All these choices are correct
Show the answer and explanation

Answer: D. All these choices are correct

All these choices are correct. Packet radio, IEEE 802.11 (Wi-Fi-type data), and FT8 all send information as digital data. Hams use all of them for digital communications.

Tip: Packet, Wi-Fi, FT8: all digital.

T8D02

What is FT8?

  1. A. A wideband FM voice mode
  2. B. A digital mode capable of low signal-to-noise operation
  3. C. An eight-channel multiplex mode for FM repeaters
  4. D. A digital slow-scan TV mode with forward error correction and automatic color compensation
Show the answer and explanation

Answer: B. A digital mode capable of low signal-to-noise operation

FT8 is a digital mode capable of low signal-to-noise operation. It can decode signals that are too weak to hear by ear. It is not a voice, repeater, or TV mode.

Tip: FT8 hears signals you can't.

T8D03

What kind of data can be transmitted by APRS?

  1. A. GPS position data
  2. B. Text messages
  3. C. Weather data
  4. D. All these choices are correct
Show the answer and explanation

Answer: D. All these choices are correct

All these choices are correct. APRS can send GPS position data, text messages, and weather data. Many weather stations and mobile stations report through APRS.

Tip: APRS: where, what, and weather.

T8D04

What is meant by the term "NTSC?"

  1. A. A digital transmission standard for encrypting data
  2. B. A special mode for satellite uplink
  3. C. An analog fast-scan color TV signal
  4. D. A frame compression scheme for TV signals
Show the answer and explanation

Answer: C. An analog fast-scan color TV signal

NTSC is an analog fast-scan color TV signal. It was the analog TV standard in the United States. Hams can still use it for amateur television on UHF and higher bands.

Tip: NTSC = old US analog color TV.

T8D05

Which of the following is an application of APRS?

  1. A. Providing real-time tactical digital communications in conjunction with a map showing the locations of stations
  2. B. Automatically showing the number of packets transmitted via PACTOR during a specific time interval
  3. C. Providing voice over internet connection between repeaters
  4. D. Providing information on the number of stations signed into a repeater
Show the answer and explanation

Answer: A. Providing real-time tactical digital communications in conjunction with a map showing the locations of stations

An APRS application is providing real-time tactical digital communications with a map showing the locations of stations. This is very helpful during events and emergencies. It does not count PACTOR packets or link repeaters by voice.

Tip: APRS puts stations on a map.

T8D06

What does the abbreviation "PSK" mean?

  1. A. Pulse Shift Keying
  2. B. Phase Shift Keying
  3. C. Packet Sampled Keying
  4. D. Power Sampled Keying
Show the answer and explanation

Answer: B. Phase Shift Keying

PSK stands for Phase Shift Keying. Data is sent by changing the phase of the signal. PSK31 is a popular ham mode that uses it.

Tip: PSK: Phase Shift Keying.

T8D07

Which of the following describes DMR?

  1. A. A technique for time-multiplexing two digital voice signals on a single 12.5 kHz repeater channel
  2. B. An automatic position tracking mode for FM mobiles communicating through repeaters
  3. C. An automatic computer logging technique for hands-off logging when communicating while operating a vehicle
  4. D. A digital technique for transmitting on two repeater inputs simultaneously for automatic error correction
Show the answer and explanation

Answer: A. A technique for time-multiplexing two digital voice signals on a single 12.5 kHz repeater channel

DMR is a technique for time-multiplexing two digital voice signals on a single 12.5 kHz repeater channel. The repeater takes turns very quickly between two time slots, so two conversations share one channel. It is not a position-tracking or logging system.

Tip: DMR: two time slots, one channel.

T8D08

Which of the following is included in packet radio transmissions?

  1. A. A checksum that permits error detection
  2. B. A header that contains the call sign of the station to which the information is being sent
  3. C. Automatic repeat request in case of error
  4. D. All these choices are correct
Show the answer and explanation

Answer: D. All these choices are correct

All these choices are correct. Packet transmissions include a checksum to detect errors, a header with the call sign of the receiving station, and automatic repeat request (ARQ) to resend bad data.

Tip: Packet = header + checksum + resend.

T8D09

What is CW?

  1. A. A type of electromagnetic propagation
  2. B. A digital mode used primarily on 2-meter FM
  3. C. Error correction for digital transmission using code words
  4. D. Another name for a Morse code transmission
Show the answer and explanation

Answer: D. Another name for a Morse code transmission

CW is another name for a Morse code transmission. CW stands for continuous wave, a carrier switched on and off to make dots and dashes. It is not a propagation type or an error-correction method.

Tip: CW = Morse code.

T8D10

Which of the following operating activities is supported by digital mode software in the WSJT-X software suite?

  1. A. Earth-Moon-Earth
  2. B. Weak signal propagation beacons
  3. C. Meteor scatter
  4. D. All these choices are correct
Show the answer and explanation

Answer: D. All these choices are correct

All these choices are correct. WSJT-X supports Earth-Moon-Earth (moonbounce), weak-signal propagation beacons, and meteor scatter. It is built for very weak or short-lived signals.

Tip: WSJT-X: weak signals of every kind.

T8D11

What is the role of ARQ in a transmission system?

  1. A. A special transmission format limited to video signals
  2. B. A system used to encrypt command signals to an amateur radio satellite
  3. C. An error correction method in which the receiving station detects errors and sends a request for retransmission
  4. D. A method of compressing data using autonomous reiterative Q codes prior to final encoding
Show the answer and explanation

Answer: C. An error correction method in which the receiving station detects errors and sends a request for retransmission

ARQ is an error correction method in which the receiving station detects errors and sends a request for retransmission. ARQ stands for Automatic Repeat reQuest. It has nothing to do with video or encryption.

Tip: ARQ = Automatic Repeat reQuest: ask for a resend.

T8D12

Which of the following best describes an amateur radio mesh network?

  1. A. An amateur-radio data network using commercial Wi-Fi equipment with modified firmware
  2. B. A wide-bandwidth digital voice mode employing DMR protocols
  3. C. An amateur-radio satellite communications network using modified commercial satellite TV hardware
  4. D. An internet linking protocol allowing communication through repeaters around the world
Show the answer and explanation

Answer: A. An amateur-radio data network using commercial Wi-Fi equipment with modified firmware

An amateur radio mesh network is an amateur-radio data network using commercial Wi-Fi equipment with modified firmware. The new firmware lets the gear run on ham frequencies and link stations together. It is not a voice, satellite, or repeater-linking system.

Tip: Mesh = Wi-Fi gear reprogrammed for ham data.

Practice T8 with scoring Take a 35-question practice exam