Home › Calculators › Frequency and wavelength calculator
Frequency and wavelength calculator
Type a frequency in MHz or a wavelength in meters; the other one fills in. You also see the amateur band and what a Technician license allows at that frequency.
Why it is 300 divided by the frequency
Every radio wave travels through space at the speed of light, about 300,000,000 meters per second, whatever its frequency (T3B11, T3B12). Wavelength is how far the wave moves during one cycle, so it is the speed divided by the number of cycles per second. With the frequency in megahertz the millions cancel out and you are left with a formula you can do in your head:
Wavelength (meters) = 300 ÷ frequency (MHz)
Frequency (MHz) = 300 ÷ wavelength (meters)
The exact speed of light is 299.79 million meters per second, so 300 is off by less than a tenth of a percent. That is far smaller than the effect of nearby objects on a real antenna, which is why every ham uses the round number.
Higher frequency means shorter wavelength (T3B05). The bands are named by their approximate wavelength (T3B07): 146 MHz works out to about 2.05 meters, which is why it is called the 2 meter band, and 446 MHz is about 67 centimeters, inside the band called 70 centimeters.
How the band finder works
The calculator compares your frequency with the US amateur band edges from 135.7 kHz to 2.45 GHz. A Technician has full privileges on every band above 50 MHz. Below 30 MHz a Technician has only four slices: CW on parts of 80, 40 and 15 meters, and CW, data and SSB voice on the low end of 10 meters, at up to 200 watts PEP (T1B11).
Two cautions. First, the number on your radio's dial is not the whole signal. An SSB voice signal spreads about 3 kHz to one side of it, so a signal set exactly at a band edge spills outside the band; leave some room (T1B09). Second, some segments have extra rules, such as CW only from 50.0 to 50.1 MHz and 144.0 to 144.1 MHz (T1B07). The tool mentions these where they apply.
The wavelength here is the wavelength in free space. Inside coax a wave travels slower, often about two thirds of the speed of light, so a quarter wavelength of cable is physically shorter than a quarter wavelength of air.
Worked examples
- 146.52 MHz: 300 ÷ 146.52 = 2.05 meters. That is in the 2 meter band (T1B04), where a Technician has full privileges. It is the national FM simplex calling frequency.
- 28.4 MHz: 300 ÷ 28.4 = 10.56 meters, in the 10 meter band. It falls inside 28.300 to 28.500 MHz, the only HF voice segment a Technician may use (T1B01, T1B06).
- 7.2 MHz: 300 ÷ 7.2 = 41.7 meters, in the 40 meter band. A Technician may only send CW from 7.025 to 7.125 MHz, so 7.2 MHz needs a General license. Try 7.1 MHz to see the difference.
- Going the other way: a wavelength of 6 meters gives 300 ÷ 6 = 50 MHz, the bottom of the 6 meter band.
Exam questions this calculator helps with
From the Technician T3 Radio Wave Propagation and T1 Commission's Rules topics. See also the formulas guide and the Technician frequency chart.
- T3B06 What is the formula for converting frequency to approximate wavelength in meters?
Wavelength in meters equals 300 divided by frequency in megahertz - T3B05 What is the relationship between wavelength and frequency?
Wavelength gets shorter as frequency increases - T3B07 In addition to frequency, which of the following is used to identify amateur radio bands?
The approximate wavelength in meters - T3B08 What frequency range is referred to as VHF?
30 MHz to 300 MHz - T3B09 What frequency range is referred to as UHF?
300 to 3000 MHz - T3B10 What frequency range is referred to as HF?
3 to 30 MHz - T1B04 Which amateur band includes 146.52 MHz?
2 meters - T1B03 Which frequency is in the 6-meter amateur band?
52.525 MHz - T1B01 Which of the following frequency ranges are available for phone operation by Technician licensees?
28.300 MHz to 28.500 MHz - T1B09 Why should you not set your transmit frequency to be exactly at the edge of an amateur band or sub-band?
All these choices are correct